IK Multimedia Axe I/O Solo
Hersteller: IK Multimedia
Weitere Informationen:
https://www.ikmultimedia.com/products/axeiosolo/index.php?p=info
305,00 CHF
Produktbeschreibung
an Lager (19.3.2024)
Compact audio interface withadvanced guitar tone shaping
Best-in-class guitar recording starts here
AXE I/O, IK’s award-winning audio interface, set a new standard for guitar-oriented recording interfaces. Now AXE I/O Solo brings the same great tone shaping, convenient features and premium sound to everyone, everywhere, in a compact and affordable 2-in / 3-out format.
Key Features
AXE I/O Solo combines IK’s two decades of innovation in analog modeling and hardware design to make recording guitar faster, easier and better than ever.
Your guitar’s golden channel
AXE I/O Solo offers a triple-topology instrument input designed to preserve your guitar’s unique character, combined with powerful tone-shaping features to adapt to any guitar or bass, and helps you coax a wider range of sounds from any instrument.
Pick your pickup:
PASSIVE: designed to accommodate everything from low-output vintage pickups to hotter modern humbuckers with ultra-low noise and extended frequency response.
ACTIVE: bypasses unnecessary gain stages when using active pick-ups, to keep your signal path as direct, transparent and clean as possible.
Choose your channel:
PURE: a completely transparent and ultra-accurate preamp
circuit that won’t color your sound in any way.
JFET: a Class A JFET input buffer for subtle harmonic
enhancement, midrange focus and warmth.
AXE I/O Solo also offers IK’s patent pending Z-TONE™ circuit, letting you dial in impedance from 1 MOhm (“sharp”) down to 2.2 kOhms (“bold”) that interacts with your pick-ups.
At the maximum impedance, you’ll find your sound tighter, sharper and more precise. Increase the load and the sound becomes thicker and bolder.
You’ll quickly find yourself using these controls to give your guitars even more sonic character – with just a few minutes’ experimentation you can dial in a sound that fits the mix beautifully.
Z-Tone
PURE mic preamp for transparent recording
AXE I/O Solo offers a high-definition, Class A mic preamp designed for transparent and clean recording. An extended, flat frequency response captures the full tonal range of your voice or instrument without coloring the sound, and best-in-class dynamic range ensures ultra-quiet recordings.
Mic_Preamps
Re-amplification made easier than ever
AXE I/O Solo offers a dedicated Amp Out, a with ground-isolated design and zero-latency routing, letting you ditch expensive and confusing reamping setups.
It’s simple: connect the Amp Out to your amp, then mic it up using AXE I/O Solo’s microphone preamp. Now you can capture a clean copy of your signal while recording and feed it back to your amp afterwards to experiment with different amp, stompbox and microphone settings without re-recording countless takes.
AXE I/O Solo Specifications
Common
Connections and Controls
Front Panel
Compact audio interface withadvanced guitar tone shaping
Best-in-class guitar recording starts here
AXE I/O, IK’s award-winning audio interface, set a new standard for guitar-oriented recording interfaces. Now AXE I/O Solo brings the same great tone shaping, convenient features and premium sound to everyone, everywhere, in a compact and affordable 2-in / 3-out format.
Key Features
- 2-in / 3-out USB audio interface
- ACTIVE/PASSIVE pick-up selector
- PURE and JFET input stages
- Z-Tone™ impedance-adapting circuit
- Amp Out with ground loop interrupter
- High-resolution, Class A mic preamp
- 24-bit, 192 kHz sound quality
- Wide frequency response ideal for instruments
- Best-in-class analog/digital conversion
- Ultra-low noise floor for high-gain recording
- Designed and made in Italy
- The best interface I’ve ever used. This interface is just… mind-blowing.
- Read what users had to say about AXE I/O
AXE I/O Solo combines IK’s two decades of innovation in analog modeling and hardware design to make recording guitar faster, easier and better than ever.
Your guitar’s golden channel
AXE I/O Solo offers a triple-topology instrument input designed to preserve your guitar’s unique character, combined with powerful tone-shaping features to adapt to any guitar or bass, and helps you coax a wider range of sounds from any instrument.
Pick your pickup:
PASSIVE: designed to accommodate everything from low-output vintage pickups to hotter modern humbuckers with ultra-low noise and extended frequency response.
ACTIVE: bypasses unnecessary gain stages when using active pick-ups, to keep your signal path as direct, transparent and clean as possible.
Choose your channel:
PURE: a completely transparent and ultra-accurate preamp
circuit that won’t color your sound in any way.
JFET: a Class A JFET input buffer for subtle harmonic
enhancement, midrange focus and warmth.
AXE I/O Solo also offers IK’s patent pending Z-TONE™ circuit, letting you dial in impedance from 1 MOhm (“sharp”) down to 2.2 kOhms (“bold”) that interacts with your pick-ups.
At the maximum impedance, you’ll find your sound tighter, sharper and more precise. Increase the load and the sound becomes thicker and bolder.
You’ll quickly find yourself using these controls to give your guitars even more sonic character – with just a few minutes’ experimentation you can dial in a sound that fits the mix beautifully.
Z-Tone
PURE mic preamp for transparent recording
AXE I/O Solo offers a high-definition, Class A mic preamp designed for transparent and clean recording. An extended, flat frequency response captures the full tonal range of your voice or instrument without coloring the sound, and best-in-class dynamic range ensures ultra-quiet recordings.
Mic_Preamps
Re-amplification made easier than ever
AXE I/O Solo offers a dedicated Amp Out, a with ground-isolated design and zero-latency routing, letting you ditch expensive and confusing reamping setups.
It’s simple: connect the Amp Out to your amp, then mic it up using AXE I/O Solo’s microphone preamp. Now you can capture a clean copy of your signal while recording and feed it back to your amp afterwards to experiment with different amp, stompbox and microphone settings without re-recording countless takes.
AXE I/O Solo Specifications
Common
- AD and DA Resolution: 24-bit
- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
- Host Connection: USB Type-B receptacle. USB 2.0 (High Speed).
- Configuration: Electronically balanced and floating, automatically compensates level when connection is balanced or unbalanced, tip hot.
- Output impedance: 150 Ohms balanced, 75 Ohms unbalanced
- Output Level: 0 dBFS corresponds to +13.5 dBu
- Frequency response: From 1 Hz to 46 kHz within 0.5 dB (96 kHz sample rate)
- Dynamic Range: 113 dB(A)
- THD @ -1 dBFS: 0.001%
- THD+N: -103 dB(A) at -1 dBFS
- Channels 1-2 crosstalk: 112 dB(A)
- Configuration: Unbalanced, floating, with selectable ground lift
- Output impedance: 75 Ohms
- Output Level: 0 dBFS corresponds to -3 dBu
- Frequency response: From 20 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
- Dynamic Range: 106 dB(A)
- THD+N: -93 dB(A)
- Output impedance: Virtually ideal source (zero Ohms) until clipping
- Maximum Output level: +9 dBu into 50 Ohms load (approx 95 mW)
- Frequency response: From 1 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
- Dynamic Range: 111 dB(A)
- THD+N: -102 dB(A)
- Configuration: Multiple topology instrument preamp
- Input impedance, PASSIVE mode: Variable from 1 MOhms down to 2.2 kOhms
- Input impedance, ACTIVE mode: 10 kOhms
- Input level, min gain: 0 dBFS is obtained with a +12.5dBu signal at the TS input
- Input level, max gain: 0 dBFS is obtained with a -19 dBu signal at the TS input
- Frequency response: From 6 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
- Dynamic Range: 117 dB(A)
- THD, PURE mode: 0.002 % (-1dBFS input)
- THD, JFET mode: 0.5 %
- Configuration: Class-A discrete differential microphone preamp, pin 2 hot
- Input impedance: 4 kOhms differential
- Input level, min gain: 0 dBFS is obtained with a +9 dBu signal at the XLR input
- Input level, max gain: 0 dBFS is obtained with a -44 dBu signal at the XLR input
- Frequency response: From 7 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
- Dynamic Range: 116 dB(A)
- THD+N: -104 dB(A) at -10 dBFS
- Configuration: Class-A discrete differential line receiver, tip hot
- Input impedance: 20 kOhms differential
- Input level, min gain: 0 dBFS is obtained with a +26 dBu signal at the TRS input
- Input level, max gain: 0 dBFS is obtained with a -27 dBu signal at the TRS input
- Frequency response: From 7 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
- Dynamic Range: 117 dB(A)
- THD+N: -104 dB(A) at -10 dBFS
Connections and Controls
Front Panel
- One 1/4" instrument input jacks
- Two analog potentiometers for Input GAIN
- Two 5 segments input level meter (peak)
- Analog potentiometers for Z-Tone control
- Pick-Up selector (PASSIVE/ACTIVE)
- Preamp topology selector (JFET/PURE)
- +48V phantom power switch
- USB LEDS
- MIDI IN/OUT LEDs
- Monitor knob
- 1/4" headphones output jack
- Master potentiometer for main output control
- 1/4" Amp output jack
- MIDI I/O 5-pin DIN connectors
- B-Type USB socket for connecting a computer (Mac/PC)
- 2 x 1/4" TRS External controllers sockets
- 2 x 1/4" TRS Balanced floating line outputs
- 1 Combo socket for MIC input and Line input (auto selecting)
- AXE I/O SOLO
- USB A-Type to USB B-Type connection cable (1.5m/4.32ft)
- Size: 19.5cm x 19.5cm x 5.3cm
- Weight: 1.0kg
Weitere Informationen: https://www.ikmultimedia.com/products/axeiosolo/index.php?p=info
Empfohlenes Zubehör
Bewertungen